Bolster
delivery time: 5 - 7 days
The perfect viewing angle
Whether book or e-reader - television or projector - it all depends on the right viewing angle. The dimensionally stable neck roll with a density of 25 offers you comfortable support.
Technical drawings
Product details
The bolster is available with various removable fabrics. Information on the different covers can be found below in the "Technical information" section
Manufacturer:
Müller Möbelwerkstätten GmbH
Urwaldstraße 8
26345 Bockhorn
Phone: +49 (0) 44 53 – 98 23 30
info@muellermoebel.de
www.muellermoebel.de
Müller Möbelwerkstätten GmbH
Urwaldstraße 8
26345 Bockhorn
Phone: +49 (0) 44 53 – 98 23 30
info@muellermoebel.de
www.muellermoebel.de
- Hybrid foam
- Length 850 mm
- Diameter 180 mm
We offer our mattresses and cushions with different covers.
CANVAS UNQUILTED
- Smooth cover
- 100 % cotton
- Colour: sand or beige
- With zip (position for mattresses: underside, 3-sided, indented by approx. 5 cm from the edge)
- Washable up to 60 degrees
QUILTED CANVAS
- Cover with square quilting
- 100% cotton
- Colour: sand or beige
- Underside with 200 g/m² quilted diolen wadding
- With zip (position for mattresses: underside, 3-sided, indented by approx. 5 cm from the edge)
- Washable up to 60 degrees
- 92 % virgin wool, worsted yarn, 8 % nylon
- 30 colours to choose from
- Abrasion resistance 60,000 cycles
- Rub fastness dry 4-5, wet 4-5
- Pill formation 4-5
- Certificates:
EU Ecolabel, Greenguard Gold, HPD, EPD - Not washable
- Fabric width 140 cm
- 75% virgin wool, 25% flax
- With zip (position for mattresses: underside, 3-sided, indented by approx. 5 cm from the edge)
- Abrasion resistance over ≥50,000 cycles
- Lightfastness 4-5
- Rub fastness dry: 4, wet: 3
- Due to its high abrasion resistance and hard-wearing nature, the fabric does not tend to pill easily
- Environmentally friendly fabric: quickly renewable and compostable, as it is made from wool and plant fibres
- Certificates:
EU Ecolabel, Indoor Advantage TM Gold certificate - Care: Vacuum regularly, wipe with a damp cloth, treat with a suitable upholstery shampoo if necessary
- 95% virgin wool, 5% polyamide
- With zip (position for mattresses: underside, 3-sided, indented by approx. 5 cm from the edge)
- Abrasion resistance over ≥50,000 cycles
- Lightfastness 4-5
- Rub fastness dry: 4, wet: 3
- Care: Vacuum regularly, wipe with a damp cloth, treat with suitable upholstery shampoo if necessary
Delivery
- by parcel service
Scope of delivery
- A bolster with removable cover
Packaging and weight
- 1 package
- 3 kg
Samples of all Müller materials
You're still unsure which material or color fits best in your interior? No problem: Simply order the samples of your choice and have them delivered to your home free of charge.
FAQ
What does HPL and CPL mean?
What does HPL and CPL mean?
CPL stands for Continuous Pressed Laminates. HPL stands for High Pressure Laminates (HPL with a thickness of > 2 mm are according to standard EN 438 compact panels).
What is special about the HPL coating on our black matte furniture?
Our HPL laminate impresses with its high abrasion, impact, and scratch resistance. It is ideal for horizontal as well as heavily used surfaces. The super matte surface feels velvety warm and is characterized by its excellent anti-fingerprint properties. This makes our HPL laminate unique and universally applicable.
Are there any special care instructions for our HPL coating?
The HPL coating does not require special care due to its resistant and hygienic, dense surface. The surface is generally easy to clean. It is important to note that sanitary cleaners or cleaning agents with abrasive components should not be used for cleaning, as such cleaners can cause changes in gloss level and scratches.
What distinguishes HPL and CPL?
The term CPL already provides a hint about the manufacturing process, meaning CPL is produced in continuously operating double belt presses with a pressing pressure between 30 and 70 bar and temperatures between 150°C and 170°C. Depending on the laminate thickness and press zone length, the feed rate varies between 8 and 15 m/min.
HPL is produced in discontinuously operating multi-daylight presses with a pressing pressure between 50 and 90 bar and temperatures of > 120°C. Very often, the pressure in connection with the manufacturing process of laminates is also given in Mega-Pascals (MPa). The multi-daylight presses have between 10 and 20 levels, and each level accommodates approximately 8 laminate sheets with a nominal thickness of 0.50 to 0.80 mm. Depending on the press loading and the maximum temperature, the complete pressing cycle including cooling takes between 20 and 60 minutes.
Delivery by our retailers
Delivery through the retailer
Müller Möbelwerkstätten collaborates with a variety of furniture retailers. This allows us to have the furniture purchased from our online shop delivered to you through them. We send the furniture to the logistics center of the respective retailer, from where our competent partner takes over the processing of your order. They will contact you to arrange a delivery appointment and optional assembly booking.
1. Why is the goods not delivered directly to me?
In most cases, delivery through our retailer involves bulky goods that require increased logistical effort for delivery. If, for example, the order were delivered directly to you by a freight forwarder, this would correspond to delivery only to the curb. With our retailers, however, we have specially trained personnel who have been trained by us for the assembly and transportation of Müller Möbelwerkstätten furniture. Particularly noteworthy for the "delivery through our specialist retailer" service are:
Scheduled delivery according to desired date
Delivery behind the first lockable door
2. Are all furniture items delivered by the retailer?
No, in not all cases can we offer this service. This naturally depends on whether there is a retailer in close proximity. In addition, our small furniture items can regularly be shipped with a parcel service (GLS).
3. Assembly by our retail partner
Assembly can be booked separately at checkout in our online shop. The costs depend on the corresponding value of the goods. The option of assembly is, of course, not mandatory, but is recommended for selected furniture items due to their complexity. In addition to the actual assembly, this service offers further advantages:
Carrying upstairs to the apartment included
Subsequent disposal of packaging
Furthermore, the service is recommended for selected furniture items due to their complexity, such as:
Modular Plus wardrobe
Plane wardrobe
Flai wardrobe
Can I have the furniture assembled?
Yes, in some countries (e.g., DE, AT, CH), we offer an assembly service. Click on "Premium Service" in the shopping cart, and your furniture will be assembled at your home by a specialist retailer for an additional fee.
Do you need consultation ?
Our team is here to assist you with any questions you may have regarding our products, the ordering process, or any other important matters !
info@muellermoebel.de
+49 (0)4453 9823-30