PLATO

Arends, Kim & Bucher

Design based on a template

Vorschau

Vorschau

Design individually

PLATO

delivery time: 2 - 3 weeks

You can only configure this product individually using the configurator. Simply click on Configure individually below.

€880.00*

Sekretär für das Home Office

Minimalism at its best 

With PLATO, the three young designers Alissa Arends, Leon Bucher and Yelim Kim have succeeded in creating a table that can be used in a variety of ways and that can be folded up and reassembled in just a few simple steps. The table is therefore quickly and flexibly available wherever it is needed; as office furniture, as a worktop or as a breakfast or buffet table. 

Quick to set up and dismantle 

PLATO is foldable, mobile and easy to stow away. The handy table frame can therefore be set up and dismantled extremely quickly.

Maximum stability 

Despite the asymmetrical frame shape, the design is sufficiently stable.

Elegant Varianten 

The PLATO table frame is powder-coated in graphite black or pure white. The 25 millimetre thick lightweight plywood top with rounded corners and edges is available in two sizes.

Order sample

Product details

The creativity of Alissa Arends, Leon Bucher and Yelim Kim, students at the renowned Bauhaus University Weimar, is evident in their minimalist design of the PLATO table. This innovative piece of furniture offers a wide range of uses and is characterised by its ease of use - it can be folded and reassembled in just a few simple steps. PLATO is therefore quickly and flexibly available wherever it is needed. Whether as practical office furniture, as a versatile worktop or as an elegant breakfast or buffet table - the functionality of this table adapts to a wide range of requirements and adds a modern touch to any room.

Hersteller:
Müller Möbelwerkstätten GmbH
Urwaldstraße 8
26345 Bockhorn
Telefon: +49 (0) 44 53 – 98 23 30
info@muellermoebel.de
www.muellermoebel.de

  • Frame: powder-coated steel
  • Tabletop birch plywood (lightweight board) or alternatively chipboard, each with a high-quality CPL coating

  • Worktop height: 750 mm
  • Frame width 1320, height 770, depth 700 mm
  • Table top with rounded corner: width 1490, height 25, depth 750 mm
  • Table top, square: width 1400 or 1600, height 25, depth 700 or 800 mm

  • Foldable
  • Mobile and easy to stow away
  • Quickly assembled and disassembled, tool-free 
  • Small space requirement when folded 
  • Rear feet are height-adjustable 
  • Table top is pushed into the rear bracket and fixed in place
  • PLATO table top Light can optionally be locked to the back of the frame with two screws
  • The table frame is powder-coated in graphite black and pure white
  • The 25 millimetre thick desk top is available as a 1490x750 millimetre lightweight plywood top with rounded corners and edges and coated in white or matt black.
  • Max. static weight load of the worktop 30kg

  • for Spediton

Designer Arends, Bucher und Kim 

Alissa Arends, Yelim Kim and Leon Bucher studied product design together at the Bauhaus-Universität Weimar from 2016 to 2021. At IMM Cologne 2018, their PLATO folding secretary desk was awarded second prize in the Pure Talents Contest.

More

FAQ

What does HPL and CPL mean? 
CPL stands for Continuous Pressed Laminates. HPL stands for High Pressure Laminates (HPL with a thickness of > 2 mm are according to standard EN 438 compact panels). 

What is special about the HPL coating on our black matte furniture? 
Our HPL laminate impresses with its high abrasion, impact, and scratch resistance. It is ideal for horizontal as well as heavily used surfaces. The super matte surface feels velvety warm and is characterized by its excellent anti-fingerprint properties. This makes our HPL laminate unique and universally applicable.

Are there any special care instructions for our HPL coating? 
The HPL coating does not require special care due to its resistant and hygienic, dense surface. The surface is generally easy to clean. It is important to note that sanitary cleaners or cleaning agents with abrasive components should not be used for cleaning, as such cleaners can cause changes in gloss level and scratches. 

What distinguishes HPL and CPL?
 The term CPL already provides a hint about the manufacturing process, meaning CPL is produced in continuously operating double belt presses with a pressing pressure between 30 and 70 bar and temperatures between 150°C and 170°C. Depending on the laminate thickness and press zone length, the feed rate varies between 8 and 15 m/min. HPL is produced in discontinuously operating multi-daylight presses with a pressing pressure between 50 and 90 bar and temperatures of > 120°C. Very often, the pressure in connection with the manufacturing process of laminates is also given in Mega-Pascals (MPa). The multi-daylight presses have between 10 and 20 levels, and each level accommodates approximately 8 laminate sheets with a nominal thickness of 0.50 to 0.80 mm. Depending on the press loading and the maximum temperature, the complete pressing cycle including cooling takes between 20 and 60 minutes.

Delivery through the retailer
Müller Möbelwerkstätten collaborates with a variety of furniture retailers. This allows us to have the furniture purchased from our online shop delivered to you through them. We send the furniture to the logistics center of the respective retailer, from where our competent partner takes over the processing of your order. They will contact you to arrange a delivery appointment and optional assembly booking. 

1. Why is the goods not delivered directly to me? 
In most cases, delivery through our retailer involves bulky goods that require increased logistical effort for delivery. If, for example, the order were delivered directly to you by a freight forwarder, this would correspond to delivery only to the curb. With our retailers, however, we have specially trained personnel who have been trained by us for the assembly and transportation of Müller Möbelwerkstätten furniture. Particularly noteworthy for the "delivery through our specialist retailer" service are: 
Scheduled delivery according to desired date 
Delivery behind the first lockable door 

2. Are all furniture items delivered by the retailer? 
No, in not all cases can we offer this service. This naturally depends on whether there is a retailer in close proximity. In addition, our small furniture items can regularly be shipped with a parcel service (GLS). 

3. Assembly by our retail partner 
Assembly can be booked separately at checkout in our online shop. The costs depend on the corresponding value of the goods. The option of assembly is, of course, not mandatory, but is recommended for selected furniture items due to their complexity. In addition to the actual assembly, this service offers further advantages: 
Carrying upstairs to the apartment included 
Subsequent disposal of packaging Furthermore, the service is recommended for selected furniture items due to their complexity, such as: Modular Plus wardrobe Plane wardrobe Flai wardrobe

Yes, in some countries (e.g., DE, AT, CH), we offer an assembly service. Click on "Premium Service" in the shopping cart, and your furniture will be assembled at your home by a specialist retailer for an additional fee.

Jochen Müller, Müller Möbelwerkstätten

Do you need assistance?

Our team is ready to assist you with any questions regarding our products, the ordering process, or any other important matters!

info@muellermoebel.de
+49 (0)4453 9823-30

To the team